This kit is unique to Scalextric Car Restorations.
This Scalextric spares red LED kit is excellent as Scalextric
car tail
lamps AND stop
lamps. While the car is under power on the track each LED
emits a moderate brightness red light ideal for the tail lamps
of Scalextric cars. When the power is released and the car slows
down, both the LEDs become much brighter just like real car brake
lights. This is accomplished with a small electronic module that
senses when the car is slowing or stopping. The module then significantly
increases the brightness of the LEDs for a short period of time.
This Scalextric spares LED kit connects to the car with only
two wires connected directly to the car motor making the fitting
simplicity itself, see the picture above where the LEDs and electronic
module are fitted to a Ford Escort Cosworth. The kit is protected
against improper electrical fitting.
The LEDs can be fitted directly to the Ford Escort Cosworth,
Ford RS200 BMW M3 and the Ford Mondeo cars as the car chassis
has the correct fittings to accept these LEDs. They can also be
fitted to almost any Scalextric cars, with a little bit of ingenuity.
If you are not sure how to connect this LED kit then please contact
us.