This type of car decal sheet was used for the early 1970s to the late 1980s

This decal sheet is printed on water slide decal sheets, just like the originals

Image shown above is not representative of the actual decal print quality. Actual decal print quality is just like the original period decals.

 

This decal sheet is printed with your unique car registration in place of the standard Scalextric registrations. Simply type in your registration in the box below.

Instructions:

1. Cut out your designs using a craft knife or pair of scissors. Cut carefully around the object if you do not want a white border.

2. Place the cut out decal into a bowl of water for 10-30 seconds. You can feel with your fingers the decal slipping away from the backing paper.

3. Place the decal onto your Scalextric car and slowly pull away the backing paper.

4. Use a lint free cloth to carefully dab the surface of the decal, this will help soak up excess water and smooth out any air bubbles.

5. Leave the decals to dry for 24 hours or use a hairdryer if you want to dry them quicker.

 

Enter your registration here: (8 characters maximum)

£4.50