This decal kit in green is complete and ready to apply

 

Unique to Scalextric Car Restorations this kit is printed on clear water slide decal sheet and contains:

• 2 roof stripes
• 4 side stripes (including 1 spare set)
• 1 boot decal
• 4 Firestone decals
• 2 Champion decals
• 4 x 2 flags
• 4 Ford decals
• 4 x 2 number plate decals
• Numbers 1 to 9 (2 off each)

1. Cut out the decal using a craft knife or pair of scissors.

2. Place the cut out decal into a bowl of water for 10-30 seconds. You can feel with your fingers the decal slipping away from the backing paper.

3. Place the decal onto your Scalextric car and slowly pull away the backing paper.

4. Use a lint free cloth to carefully dab the surface of the decal, this will help soak up excess water and smooth out any air bubbles.

5. Leave the decals to dry for 24 hours or use a hairdryer if you want to dry them quicker.